#11 2011.05.10 13:00

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

phpmyadmin пишет Ошибка в ZIP-архиве: CRC32 checksum is not equal with the value in header information.
А бета менеджер вообще не залевает
Пишет\
Выполнено Запросов: 0
Затронуто строк: 0
Операция Заняла: 0 сек.

Отредактировано TLENS (2011.05.10 13:02)

Неактивен

#12 2011.05.10 13:11

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

Блин проблема в кавичках

Неактивен

#13 2011.05.11 01:28

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

Слушай гемор ты можешь обяснить как правильно сформулировать базу.
У меня в txt остались выкачаные ключи к трекам я перезалью по новой.
как именно надо создать таблицу. Чтобы и поиск работал норм и небыло проблем с кодировкой.

Неактивен

#14 2011.05.11 19:36

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

Все сделал

Код:

1
lt;?mysql_query("SET NAMES 'utf8';");mysql_query("SET SQL_MODE = 'NO_AUTO_VALUE_ON_ZERO';");mysql_query("SET SESSION character_set_results = 'utf8';");mysql_query("SET collation_connection = 'utf8_unicode_ci';");mysql_query("SET character_set_results = 'utf8';");mysql_query("SET character_set_client = 'utf8';");$sql = mysql_query('SELECT * FROM `albom` LIMIT 0, 30 ');?>

Это надо после каждого соединения с базой вставлять?
Все отображается норм вот только база запортаченая
Прийдерся переливать. По новой

Отредактировано TLENS (2011.05.11 19:45)

Неактивен

#15 2011.05.11 20:59

Gemorroj
Administrator
Откуда: Белоруссия
Зарегистрирован: 2007.11.03
Сообщений: 6593
Карма: 107
Профиль Веб-сайт

Re: Выборка без учета регистра

из всего что ты написал нужно лишь mysql_query("SET NAMES 'utf8';");
да, вставлять после соединения с БД, если по умолчанию mysql настроен не на utf8, а по умолчанию он на него НЕ настроен, а у админов руки не оттуда чтобы изменить.

Неактивен

#16 2011.05.11 21:22

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

ХЗ а сам себе админ.
это в /etc/mysql/my.cnf надо настроить? у меня debian

Неактивен

#17 2011.05.11 21:26

Gemorroj
Administrator
Откуда: Белоруссия
Зарегистрирован: 2007.11.03
Сообщений: 6593
Карма: 107
Профиль Веб-сайт

Re: Выборка без учета регистра

Код:

1
2
3
[mysqld]
collation_server=utf8_general_ci
character_set_server=utf8

Неактивен

#18 2011.05.11 21:26

TLENS
Moderator
Откуда: Украина
Зарегистрирован: 2009.04.05
Сообщений: 2402
Карма: 14
Профиль

Re: Выборка без учета регистра

У меня там нет настройки кодировки по крайней мере я не нашел ео нашел отдел [mysqld]

Код:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
 
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
 
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
 
[mysqld]
#
# * Basic Settings
#
user = mysql
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
language = /usr/share/mysql/english
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#
# * Fine Tuning
#
key_buffer = 16M
max_allowed_packet = 16M
thread_stack = 128K
thread_cache_size = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover = BACKUP
#max_connections = 100
#table_cache = 64
#thread_concurrency = 10
#
# * Query Cache Configuration
#
query_cache_limit = 1M
query_cache_size = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
#log = /var/log/mysql/mysql.log
#
# Error logging goes to syslog. This is a Debian improvement :)
#
# Here you can see queries with especially long duration
#log_slow_queries = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#log_bin = /var/log/mysql/mysql-bin.log
expire_logs_days = 10
max_binlog_size = 100M
#binlog_do_db = include_database_name
#binlog_ignore_db = include_database_name
#
# * BerkeleyDB
#
# Using BerkeleyDB is now discouraged as its support will cease in 5.1.12.
skip-bdb
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
# You might want to disable InnoDB to shrink the mysqld process by circa 100MB.
#skip-innodb
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
 
 
 
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
 
[mysql]
#no-auto-rehash # faster start of mysql but no tab completition
 
[isamchk]
key_buffer = 16M
 
#
# * NDB Cluster
#
# See /usr/share/doc/mysql-server-*/README.Debian for more information.
#
# The following configuration is read by the NDB Data Nodes (ndbd processes)
# not from the NDB Management Nodes (ndb_mgmd processes).
#
# [MYSQL_CLUSTER]
# ndb-connectstring=127.0.0.1
 
 
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/

Добавлено спустя   2 минуты  36 секунд:
слушай я поставил general_ci
а в скрипте наверное буду вызывать где надо unicode_ci
Добавлено спустя   7 минут  14 секунд:
Не сработало почему то без настроек после соединения
Вот что у меня в настройках

Код:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
 
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
 
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
 
[mysqld]
 
#
# * Basic Settings
#
 
############################
collation_server =utf8_general_ci
character_set_server =utf8
############################
 
user = mysql
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
language = /usr/share/mysql/english
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#
# * Fine Tuning
#
key_buffer = 16M
max_allowed_packet = 16M
thread_stack = 128K
thread_cache_size = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover = BACKUP
#max_connections = 100
#table_cache = 64
#thread_concurrency = 10
#
# * Query Cache Configuration
#
query_cache_limit = 1M
query_cache_size = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
#log = /var/log/mysql/mysql.log
#
# Error logging goes to syslog. This is a Debian improvement :)
#
# Here you can see queries with especially long duration
#log_slow_queries = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#log_bin = /var/log/mysql/mysql-bin.log
expire_logs_days = 10
max_binlog_size = 100M
#binlog_do_db = include_database_name
#binlog_ignore_db = include_database_name
#
# * BerkeleyDB
#
# Using BerkeleyDB is now discouraged as its support will cease in 5.1.12.
skip-bdb
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
# You might want to disable InnoDB to shrink the mysqld process by circa 100MB.
#skip-innodb
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
 
 
 
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
 
[mysql]
#no-auto-rehash # faster start of mysql but no tab completition
 
[isamchk]
key_buffer = 16M
 
#
# * NDB Cluster
#
# See /usr/share/doc/mysql-server-*/README.Debian for more information.
#
# The following configuration is read by the NDB Data Nodes (ndbd processes)
# not from the NDB Management Nodes (ndb_mgmd processes).
#
# [MYSQL_CLUSTER]
# ndb-connectstring=127.0.0.1
 
 
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/

Неактивен

Дополнительно

forum.wapinet.ru

PunBB Mod v0.6.2
0.013 s