Вы не зашли.
Главная » PHP » Выборка без учета регистра
#11. TLENS Off (14)
Moderator
2011.05.10 13:01
phpmyadmin пишет Ошибка в ZIP-архиве: CRC32 checksum is not equal with the value in header information.
А бета менеджер вообще не залевает
Пишет\
Выполнено Запросов: 0
Затронуто строк: 0
Операция Заняла: 0 сек.
Отредактировано TLENS (2011.05.10 13:01)
#12. TLENS Off (14)
Moderator
2011.05.10 13:01
Блин проблема в кавичках
#13. TLENS Off (14)
Moderator
2011.05.11 01:01
Слушай гемор ты можешь обяснить как правильно сформулировать базу.
У меня в txt остались выкачаные ключи к трекам я перезалью по новой.
как именно надо создать таблицу. Чтобы и поиск работал норм и небыло проблем с кодировкой.
#14. TLENS Off (14)
Moderator
2011.05.11 19:07
Все сделал
Код:
lt;?mysql_query("SET NAMES 'utf8';");mysql_query("SET SQL_MODE = 'NO_AUTO_VALUE_ON_ZERO';");mysql_query("SET SESSION character_set_results = 'utf8';");mysql_query("SET collation_connection = 'utf8_unicode_ci';");mysql_query("SET character_set_results = 'utf8';");mysql_query("SET character_set_client = 'utf8';");$sql = mysql_query('SELECT * FROM `albom` LIMIT 0, 30 ');?>
Это надо после каждого соединения с базой вставлять?
Все отображается норм вот только база запортаченая
Прийдерся переливать. По новой
Отредактировано TLENS (2011.05.11 19:07)
#15. Gemorroj Off (107)
Administrator
2011.05.11 20:08
из всего что ты написал нужно лишь mysql_query("SET NAMES 'utf8';");
да, вставлять после соединения с БД, если по умолчанию mysql настроен не на utf8, а по умолчанию он на него НЕ настроен, а у админов руки не оттуда чтобы изменить.
#16. TLENS Off (14)
Moderator
2011.05.11 21:09
ХЗ а сам себе админ.
это в /etc/mysql/my.cnf надо настроить? у меня debian
#17. Gemorroj Off (107)
Administrator
2011.05.11 21:09
Код:
[mysqld]
collation_server=utf8_general_ci
character_set_server=utf8
#18. TLENS Off (14)
Moderator
2011.05.11 21:09
У меня там нет настройки кодировки по крайней мере я не нашел ео нашел отдел [mysqld]
Код:
#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
 
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
 
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
 
[mysqld]
#
# * Basic Settings
#
user = mysql
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
language = /usr/share/mysql/english
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#
# * Fine Tuning
#
key_buffer = 16M
max_allowed_packet = 16M
thread_stack = 128K
thread_cache_size = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover = BACKUP
#max_connections = 100
#table_cache = 64
#thread_concurrency = 10
#
# * Query Cache Configuration
#
query_cache_limit = 1M
query_cache_size = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
#log = /var/log/mysql/mysql.log
#
# Error logging goes to syslog. This is a Debian improvement :)
#
# Here you can see queries with especially long duration
#log_slow_queries = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#log_bin = /var/log/mysql/mysql-bin.log
expire_logs_days = 10
max_binlog_size = 100M
#binlog_do_db = include_database_name
#binlog_ignore_db = include_database_name
#
# * BerkeleyDB
#
# Using BerkeleyDB is now discouraged as its support will cease in 5.1.12.
skip-bdb
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
# You might want to disable InnoDB to shrink the mysqld process by circa 100MB.
#skip-innodb
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
 
 
 
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
 
[mysql]
#no-auto-rehash # faster start of mysql but no tab completition
 
[isamchk]
key_buffer = 16M
 
#
# * NDB Cluster
#
# See /usr/share/doc/mysql-server-*/README.Debian for more information.
#
# The following configuration is read by the NDB Data Nodes (ndbd processes)
# not from the NDB Management Nodes (ndb_mgmd processes).
#
# [MYSQL_CLUSTER]
# ndb-connectstring=127.0.0.1
 
 
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/
Добавлено спустя   2 минуты  36 секунд:
слушай я поставил general_ci
а в скрипте наверное буду вызывать где надо unicode_ci
Добавлено спустя   7 минут  14 секунд:
Не сработало почему то без настроек после соединения
Вот что у меня в настройках
Код:
#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
 
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
 
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
 
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
 
[mysqld]
 
#
# * Basic Settings
#
 
############################
collation_server =utf8_general_ci
character_set_server =utf8
############################
 
user = mysql
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
language = /usr/share/mysql/english
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#
# * Fine Tuning
#
key_buffer = 16M
max_allowed_packet = 16M
thread_stack = 128K
thread_cache_size = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover = BACKUP
#max_connections = 100
#table_cache = 64
#thread_concurrency = 10
#
# * Query Cache Configuration
#
query_cache_limit = 1M
query_cache_size = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
#log = /var/log/mysql/mysql.log
#
# Error logging goes to syslog. This is a Debian improvement :)
#
# Here you can see queries with especially long duration
#log_slow_queries = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#log_bin = /var/log/mysql/mysql-bin.log
expire_logs_days = 10
max_binlog_size = 100M
#binlog_do_db = include_database_name
#binlog_ignore_db = include_database_name
#
# * BerkeleyDB
#
# Using BerkeleyDB is now discouraged as its support will cease in 5.1.12.
skip-bdb
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
# You might want to disable InnoDB to shrink the mysqld process by circa 100MB.
#skip-innodb
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
 
 
 
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
 
[mysql]
#no-auto-rehash # faster start of mysql but no tab completition
 
[isamchk]
key_buffer = 16M
 
#
# * NDB Cluster
#
# See /usr/share/doc/mysql-server-*/README.Debian for more information.
#
# The following configuration is read by the NDB Data Nodes (ndbd processes)
# not from the NDB Management Nodes (ndb_mgmd processes).
#
# [MYSQL_CLUSTER]
# ndb-connectstring=127.0.0.1
 
 
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/
Страниц: 1 2 Все
Главная
WEB
PunBB Mod v0.6.2
0.019 s